By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View as
In stock
Sacit
Reference: CAV000081
56.08 kr
44,86 kr tax excl.
Fast delivery
2-year warranty
Reversible hammer-brush, combining a hammer and a brush for chipping and brushing slag from the weld bead.
Practical 2-in-1 tool for post-weld cleaning.
Carefully sized handle to keep the user away from the hot zone.
Dimensions:
Total length (brush + handle): 290 mm (brush + handle length)
Handle length: 145 mm
Wire length: 25 mm
In stock
A.T.I
Reference: 16500
45.56 kr
36,44 kr tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Total brush length including handle 245 mm
Useful length 135 mm
In stock
A.T.I
Reference: 16501
46.11 kr
36,89 kr tax excl.
Fast delivery
2-year warranty
Wooden-handled welding brush with 3 rows of steel wire for brushing the weld bead.
Total brush length including handle 290 mm
Handle length 135 mm
Wire length 25 mm
In stock
Weldline
Reference: W000335164
79.62 kr
63,70 kr tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 330 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm) providing a very good grip on the hammer.
In stock
SOUDO METAL
Reference: F11805S
86.40 kr
69,12 kr tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 295 grams
Steel handle with a total length of 27 cm.
In stock
A.T.I
Reference: 16504
114.93 kr
91,94 kr tax excl.
Fast delivery
2-year warranty
Welding brush with plastic handle comprising 30 mm wavy stainless steel wires for brushing the weld bead to remove slag.
This brush allows non-aggressive cleaning of steel, stainless steel, or non-ferrous metals.
Total brush length including handle: 245 mm
Usable length: 135 mm
In stock
Sacit
Reference: F11808S
77.21 kr
96.51 kr
61,77 kr tax excl.
Fast delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile-basic...) or gasless welding wire.
Weight 273 Grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Klingspor
Reference: 358370
109.67 kr
87,73 kr tax excl.
Fast delivery
2-year warranty
Welding brush with wooden handle comprising 4 rows of straight stainless steel wires for brushing welds to produce a clean bead by removing slag.
Total brush length including handle 290 mm
Usable length 125 mm
In stock
Trafimet
Reference: lot 010341
128.86 kr
143.18 kr
103,09 kr tax excl.
Free delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm
In stock
A.T.I
Reference: 16508
149.96 kr
119,97 kr tax excl.
Free delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Long handle to keep a safe distance from the heat of the welded part
Total brush length including handle: 370 mm
Effective length: 135 mm
In stock
FISCHER-DAREX
Reference: CPJ5
88.90 kr
71,12 kr tax excl.
Fast delivery
2-year warranty
Knurled body Ø 0.8 mm
Diameter 2-3-4-5-6 mm
A welding brush is used to clean metal before or after welding. It removes slag, oxides and spatter; use a dedicated stainless steel brush for stainless steel.
Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
