Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Reference: 040328
415.41 kr
332,33 kr tax excl.
or 4 x 103,85 kr
Free delivery
2-year warranty
3-burner heating torch kit
Welding Torch & Professional Torch | EURO-WELDING
By choosing a welding machine on the EURO-WELDING website, you are guaranteed that it is designed by a French or European manufacturer complying with the EN 60974-1 manufacturing standard.
Compliance with this EN 60974-1 standard by the manufacturer guarantees that the equipment produced is intended for industrial and professional use, and that with regard to the rules relating to electromagnetic compatibility, this equipment is rated class A.
It is your responsibility to check the following points before any use
- That the electrical network used when operating this type of equipment is properly earthed
- That the electrical line to which you connect the welding machine is controlled by a fuse whose amperage is in line with that indicated on the nameplate of the machine or that indicated in the supplier's manual.
Depending on the model of machine that interests you, specifically its power in Amperes or its type of current (single-phase or three-phase), it is your responsibility to contact your electricity supplier to ensure that you have the appropriate subscription.
-Pacemaker wearers should consult a doctor before using this equipment. Exposure to electromagnetic fields during welding may have other effects on health that are not yet known.
As a general rule, as with any other tool, it is essential to read the user manual provided with the machine, including the safety instructions, before using this equipment.
View my favorites
View as
Supplier stock
Reference: 038875
6,023.39 kr
4 818,71 kr tax excl.
Free delivery
2-year warranty
CH1000 oxypropane heating torch (with 1 burner)
Supplier stock
Reference: 038806
2,215.50 kr
1 772,40 kr tax excl.
or 4 x 553,88 kr
Free delivery
2-year warranty
Oxypropane heating / brazing torch CH120 (with 3 burners)
Supplier stock
Reference: 040335
623.11 kr
498,49 kr tax excl.
or 4 x 155,78 kr
Free delivery
2-year warranty
Adjustable heating torch CH80 (nozzle Ø 60mm)
Supplier stock
Reference: 038936
207.70 kr
166,16 kr tax excl.
or 3 x 69,23 kr
Free delivery
2-year warranty
G1 oxy/acetylene cutting head - gauge 20/10
Supplier stock
Reference: 038929
207.70 kr
166,16 kr tax excl.
or 3 x 69,23 kr
Free delivery
2-year warranty
G1 oxy/acetylene cutting head - 16/10 gauge
Supplier stock
Reference: 038912
207.70 kr
166,16 kr tax excl.
or 3 x 69,23 kr
Free delivery
2-year warranty
G1 oxy/acetylene cutting tip - gauge 12/10
Supplier stock
Reference: 038905
207.70 kr
166,16 kr tax excl.
or 3 x 69,23 kr
Free delivery
2-year warranty
G1 oxy/acetylene cutting head - gauge 10/10
Supplier stock
Reference: 038899
207.70 kr
166,16 kr tax excl.
or 3 x 69,23 kr
Free delivery
2-year warranty
G1 oxy/acetylene cutting head - size 7/10
Supplier stock
Reference: 038813
415.41 kr
332,33 kr tax excl.
or 4 x 103,85 kr
Free delivery
2-year warranty
CG1 oxy/acetylene cutting head - calibre 12/10
Supplier stock
Reference: 038776
415.41 kr
332,33 kr tax excl.
or 4 x 103,85 kr
Free delivery
2-year warranty
CG1 oxy/acetylene cutting head - size 10/10
Supplier stock
Reference: 038769
415.41 kr
332,33 kr tax excl.
or 4 x 103,85 kr
Free delivery
2-year warranty
CG1 oxy/acetylene cutting head - calibre 7/10
Supplier stock
Reference: 038868
2,492.44 kr
1 993,95 kr tax excl.
or 4 x 623,11 kr
Free delivery
2-year warranty
OX/AD G1000 Welding Torch (with tips)
Supplier stock
Reference: 133470
2,827.12 kr
2 261,69 kr tax excl.
or 4 x 706,78 kr
Free delivery
2-year warranty
HP CUTTER ROC1
Head mixing torch
The HP CUTTER ROC-1 torch has a superior cutting capacity (300mm)
The cutting OXYGEN supply is activated by pressing the trigger
- For all cutting work
- Cuts up to 300mm
- Removable socket inlet
Delivered without cutting head
Supplier stock
Reference: 137934
1,142.37 kr
913,89 kr tax excl.
or 4 x 285,59 kr
Free delivery
2-year warranty
COUPEUR ROC-E CONE G1
HP-type cutting torch with head mixing, dual gas: oxygen and combustible gases (acetylene or propane).
Switching from one combustible gas to another is done by simply changing the cutting nozzle, which are G1 type.
The valves are in the rear position and the cutting lever is placed under the handle for a better grip.
Delivered with 3 nozzles:
1x 25-50mm
1x 50-80mm
1x 80-120mm
Technical specifications:
- High-pressure cutter compliant with NF EN and ISO 5172 standards
- 90° cutting head angle
- Removable socket inlets for Ø10x17 hose
- Cutting capacity up to 300mm
- Weight 1.3kg; length 54cm with sockets
- Packaging dimensions: 51cm x 10.5cm x 8cm
In stock
Reference: 137937
900.05 kr
720,04 kr tax excl.
or 4 x 225,01 kr
Free delivery
2-year warranty
ACETYLENE REGULATOR DAE WITH STEM
For use with ACETYLENE gas
Pressure from 0 to 205 Bar
Maximum flow rate: 5 m3/h
Inlet connection: NF-Type H
In stock
Reference: 137932
865.43 kr
692,34 kr tax excl.
or 4 x 216,36 kr
Free delivery
2-year warranty
OXYGEN REGULATOR DOE
For OXYGEN gas use
Pressure from 0 to 16 Bar
Max flow rate: 25 m3/h
Inlet connection: NF-Type F
Supplier stock
Reference: 137931
789.27 kr
631,42 kr tax excl.
or 4 x 197,32 kr
Free delivery
2-year warranty
FLOWMETER DBE 0-32L/MIN NEUTRAL GAS
Connector: NF-Type C
The oxyacetylene torch remains a versatile and irreplaceable tool in many workshops. By combining oxygen and acetylene, it produces an extremely hot flame capable of welding, brazing, heating or cutting metal. Discover our selection of torches and equipment for flame welding, as well as our advice on choosing the right gear.
How does an oxyacetylene torch work?
The oxyacetylene torch mixes two gases — oxygen and acetylene — in adjustable proportions. The combustion of this mixture generates a flame that can exceed 3,000 °C, sufficient to bring steel to its melting point. By adjusting the ratio of the two gases, the operator can achieve an oxidising, neutral or carburising flame depending on the task at hand: welding, brazing, heating or oxy-cutting. This versatility explains the longevity of this process. Browse all our equipment on the flame welding page.
Welding, brazing, heating, cutting
The strength of the oxyacetylene torch lies in its versatility. It can weld thin metals, braze copper and brass (plumbing, air conditioning), heat a workpiece to bend it or free a seized assembly, and even cut steel by oxy-cutting. No other tool covers such a wide spectrum with such a modest investment. For complete units, see our oxy-acetylene welder range.
Choosing the right equipment
A flame welding set consists of the oxyacetylene torch itself, interchangeable nozzles depending on the task, hoses, regulators to control the pressure of each gas, and safety flashback arrestors. The quality of the torch and its nozzles determines the precision of the adjustment and the consistency of the flame. Explore our dedicated range of torches to find the model suited to your needs.
Safety, the absolute priority
Working with pressurised gases and an intense flame requires strict precautions. Cylinders must be secured and kept away from any heat source. Flashback arrestors are essential to prevent flames from travelling back into the hoses. For the operator, goggles or a protective visor with the appropriate shade protect the eyes from the intense flame light, and welding gloves protect the hands from heat.
Compared to electric processes
The oxyacetylene torch requires no electrical supply, making it invaluable on sites without power. However, for structural assemblies and modern production work, arc processes such as TIG or MIG-MAG offer greater precision and productivity. Many workshops keep both approaches, each having its own area of preference.
The three types of flame and their uses
Mastering the oxyacetylene torch requires understanding the three flame settings. The neutral flame, balanced between oxygen and acetylene, is suitable for welding steel: it is the most common setting. The oxidising flame, richer in oxygen, is hotter and is used notably for brass and certain cuts. The carburising flame, richer in acetylene, deposits carbon and is used for specific applications such as hard-facing. Knowing how to read the flame — the length and colour of the inner cone — allows precise adjustment of the gas ratio to achieve the desired result.
Equipment maintenance and inspection
The safety of a flame welding station depends on the good condition of each component. Regularly check the tightness of fittings with soapy water (never with a flame), check hoses for cracks and replace them at the slightest doubt. The regulators must be in perfect working order, and the flashback arrestors checked. Clean the nozzles of the torch with the appropriate reamers to maintain a steady flame. Well-maintained equipment, combined with proper eye protection, guarantees years of safe use. Always store oxygen and acetylene cylinders upright, secured and in a ventilated area, away from any heat source or spark. When lighting, open the acetylene first, ignite, then add oxygen to adjust the flame; when extinguishing, proceed in reverse order. These methodical steps, specific to the oxyacetylene torch, quickly become automatic habits that make all the difference between safe practice and unnecessary risk-taking.
Our advice
For brazing, heating and small flame welding jobs, the oxyacetylene torch remains an indispensable and cost-effective tool. Choose a complete, certified set equipped with reliable regulators and flashback arrestors, and never skimp on eye protection. Browse our selection of torches and accessories for flame welding, and equip yourself with safe and durable equipment.