Welding Product: Liquid and Spray for Welding - Welding Cleaner

This brush is used for applying stainless steel cleaning products.
Wooden handle, acid-resistant.

Brush width 30 mm
Handle length 30 cm

PK is the ultimate versatile unlocking lubricant spray that Siliconi Spa takes pride in as part of its extensive range of high-quality technical aerosols for industry.

The PK multipurpose spray is ideal for releasing, lubricating, cleaning and de-oxidising bolts, gears, work tools, delicate mechanisms, electrical components, seals and industrial machinery from dirt, rust and oxidation.

PK performs seven simultaneous actions:

1. Action of unlocking nuts, screws, bolts, and components seized by rust;
2. Lubricating action for moving mechanisms, electronic parts, automotive components, bicycles, work and household tools;
3. Anti-rust protective action on metal surfaces, through the creation of a thin film that protects the treated surface from corrosion caused by atmospheric agents and salt for a long time;
4. De-oxidising action on electrical contacts: reactivates oxidised contacts and eliminates electrical dispersion;
5. Water-repellent action: removes water and moisture from every treated surface;
6. Anti-freeze action: allows resistance to sub-zero temperatures;
7. Cleaning and degreasing action: removes grease, oil and deposits from metal surfaces.

Among its many properties, the PK multipurpose spray is particularly suited to surfaces in marine environments, does not attack rubber or plastic, and contains no silicone.

The product is available in both the standard version and with the SMART dispenser button, which allows targeted dispensing, thanks to the practical tube mounted on the dispenser button, which increases spray precision on the least accessible parts and enhances the product's action. The great ease of application of the PK spray is characterised by the ability to dispense the product in any position in which the aerosol can is placed.

The PK multipurpose spray is a green product, as it contains renewable raw materials and the production process used to create it uses 80% renewable energy.

MOLISIL is used as an anti-spatter product to protect the torch "nozzle" against droplet adhesion.
It is a very effective anti-spatter because it contains MOS2 and graphite in slightly higher quantities than a standard anti-spatter product
(oil-based).
MOLISIL can also be used as a lubricant to lubricate moving mechanical parts, prevent friction and reduce wear. It is used for high-temperature lubrication.

500 ml aerosol can

INSTRUCTIONS FOR USE

Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve clogging.

SPECIFICATIONS

Base: Molybdenum disulphide and graphite
Propellant: Odourless denatured hydrocarbon.
Temperature resistance: 700°C
Appearance: Dry grey film
CFC-FREE CHLORINE-FREE

CLINOX Green is a cleaner for stainless steel and chrome surfaces.
CLINOX Green is an innovative product as it contains biodegradable detergents free of hexane and chlorinated compounds, with high detergent power. Furthermore, its formula is highly concentrated in active ingredients, with a reduced propellant content.
It removes rings, grease, oils, and dirt, and leaves a protective film that reduces future scratches and protects machines from stains, dust, marks, and corrosion.
It does not scratch or stain. It contains no substances that could damage, stain, or harm treated surfaces.
CLINOX Green cleans stainless steel surfaces on industrial equipment, kitchens, refrigerators, doors, countertops. Biodegradable. Eco-compatible

500 ml aerosol

DIRECTIONS FOR USE
Shake the dispenser before use.
Spray the product onto a dry cloth and clean the surfaces

SPECIFICATIONS
Base: Biodegradable cleaner
Propellant: Mixture of denatured, odorless and non-toxic propellants
Appearance: White liquid
pH: 6 - 8
Keep away from heat sources and out of direct sunlight.
Store in a dry place at temperatures between +5°C and +35°C.
Shelf life: 12 months

SUPER BALL is the best method for finding a gas leak on pressurized parts. Bubbles appear at the location of the leak. It can be used on all gases, even at low pressure (nitrogen, carbon dioxide, refrigeration systems).
Thanks to its formulation with specially selected components, it reveals micro-leaks on low surface tension surfaces

500 ml aerosol

INSTRUCTIONS FOR USE
Shake the aerosol well before use.
Spray the product from a distance of 10 cm;
For professional use only

CHARACTERISTICS
Base: Mixture of foaming components
Propellant: Denatured and odorless hydrocarbon
Appearance: White foamy liquid
Application temperature: -10°C to +130°C (approximately)
Biodegradability: Greater than 80%
Odor: None
CFC-FREE, non-toxic

RIVELEX 200 is an aerosol product for detecting cracks or porosity caused by welding in all types of materials. Thanks to its composition, RIVELEX 200 can be applied very quickly, as it contains fast-evaporating solvents that leave a white powder on treated surfaces, enabling crack detection.
It can be used with red and fluorescent penetrants (PENTRIX 100).

400 ml aerosol

INSTRUCTIONS FOR USE
Shake the aerosol for at least one minute before use.
Spray RIVELEX 200 at a distance of approximately 20 to 30 cm onto the part that has been previously treated with a liquid penetrant.
Wait 10 to 20 minutes for the product to be fully effective.
Then inspect the treated materials.
This product causes no damage to treated materials.
The bases used comply with the regulations, ASME 2644 type II; MIL-I-25135 form D type II..

CHARACTERISTICS
Base: Mixture of solvents and white powders
Propellant: Denatured hydrocarbon, odorless
Appearance: White liquid
CFC-FREE

SUPER CLEANER is a fast and powerful cleaner for removing: oils, greases, stains, dirt, and sludge. It is suitable for cleaning engines, gears, chains, hard surfaces, chrome parts, plastics, steel, bicycles, aluminium painted parts, chains, and gearboxes. It does not damage rubber, plastic, or carbon frames. Free from petroleum solvents. It contains additives that leave a shiny, protective film on treated surfaces. It does not corrode or scratch treated materials. BIODEGRADABLE.

Thanks to its formula, it can penetrate and dissolve all types of dirt or encrustation.

750 ml spray bottle

It cleans without leaving greasy residues.

Suitable for cleaning: industrial machines, workbenches, engines, chrome frames, chains, chrome parts, external engine parts, nozzles, mechanical movements, plates, iron parts, copper, engine parts, car rims.

SUPER CLEANER reduces the adhesion of dirt on treated surfaces.

✓ Non-flammable
✓ Non-toxic
✓ Ammonia-free
✓ Non-abrasive

INSTRUCTIONS FOR USE
Wet the parts to be cleaned with water, then apply SUPER CLEANER onto them.
Wait a few minutes for the product to act and dissolve the dirt.
Then remove the dirt with a cloth.
Repeat the operation if the dirt is difficult to remove.
It can also be diluted with water to clean delicate surfaces or fabrics.

CHARACTERISTICS
Base: Mixture of detergents and degreasers
Appearance: Transparent amber liquid
Odour: Fragranced
pH: Alkaline
Viscosity: Fluid
Biodegradability: Over 80%

ZINCONSIL 430 is used for cold galvanising on all metals. An aerosol with a high zinc content used particularly for touch-ups on welds, to restore or galvanise metal parts, to galvanise and protect bolts exposed to weathering for long periods, to restore grilles, gates, metal parts, containers and metal structures.
ZINCOSIL 430 is also an effective protector against corrosion from atmospheric agents, salt and moisture.

400 ml aerosol

PROPERTIES:
- Contains no chlorinated solvents,
- High zinc content,
- Fast drying,
- Does not drip,
- High coverage power,
- High corrosion resistance,
- Good resistance to atmospheric agents, washing agents, oxidising agents.
- Colour identical to galvanising,
- Durable protection
- The aerosol is fitted with an anti-drip diffuser; its use does not cause stains.

INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from becoming blocked.

SPECIFICATIONS
Base: Pure zinc 98% on synthetic backing
Pigment purity:>98%
Propellant: Denatured and odourless hydrocarbon
Appearance: Light grey colour
Dry film thickness: 20 to 40 µm (cross-coat)
Coverage capacity: high
Coverage rate: approx. 120 ml/m²
Temperature resistance: -50°C to +250°C (Metal powder resists up to 700°C)
Drying time: 5 to 10 minutes. Fast drying, does not drip.
Electrical conductivity: high
Abrasion resistance: Very high
Cross-cut: DIN 53151 - ISO 2409 = GTO/GT1
Oxidation resistance: Very good corrosion resistance

ZINCO 98 is an aerosol with a high zinc content, particularly suitable for welding touch-ups, for restoring or galvanising parts, and for galvanising and protecting nuts and bolts exposed to the weather over a long period.
This product creates a solid, resistant zinc film that protects steel materials from oxidation and can be painted over or left as is. It withstands salt spray for several hours.
The can is fitted with an anti-drip feature to prevent mess during use.

400 ml aerosol

INSTRUCTIONS FOR USE
Concentrated product
Shake the aerosol vigorously for at least 1 minute before use until the ball inside the aerosol is moving.
Never use without shaking the aerosol, otherwise the heavy concentrated zinc powder at the bottom settles inside the nozzle and blocks the valve, rendering the aerosol unusable

SPECIFICATIONS
Base: Pure zinc at 98%
Pigment purity:>98%
Appearance: Dark grey colour
Propellant: Odourless denatured hydrocarbon. Does not contain CFC
Dry film thickness: 30-60 microns
Coverage power: High
Coverage value: approx. 150ml/m2
Drying time: 5-10 minutes (fast drying, does not drip)
Electrical conductivity: High
Abrasion resistance: Very high
Oxidation resistance: Very good corrosion resistance
Temperature resistance: From -50°C to +500°C

PENTRIX 100 is a red penetrant liquid in aerosol form, formulated to reveal cracks, crazes or porosity caused by welding on ferrous materials and other metals.
Thanks to its intense colour and composition, PENTRIX can penetrate the most complex areas and reveal cracks and crazes caused by welding.

400 ml aerosol

INSTRUCTIONS FOR USE
Shake well before use.
1. Degrease and clean the surface to be treated with METACLEAN aerosol degreaser;
2. Spray PENTRIX 100 on the parts to be inspected;
3. Wait 10 to 70 minutes for the product to fully penetrate.
4. Clean the treated surfaces with water or solvent. Do not spray solvent aerosol directly onto treated surfaces as this could remove all of the red liquid.

CHARACTERISTICS
Base: Mixture of petroleum distillates, dyes and surface tension protectors.
Appearance: Red liquid
Propellant: Denatured hydrocarbon, non-toxic and odourless
CFC-FREE

METACLEAN is a degreaser and aerosol cleaner for metals.
It removes all types of dirt present on metal: oil traces, grease, incrustations, tar, carbon and adhesive residues. It is also effective on steel and aluminum.

400 ml aerosol can

INSTRUCTIONS FOR USE
(Concentrated product – shake well before use)
Spray onto surfaces to be treated, then clean with a cloth or with compressed air.

CHARACTERISTICS
Base: Mixture of solvents and degreasers with low surface tension
Appearance: Clear liquid
Propellant: Denatured hydrocarbon, non-toxic, odorless, colorless.
DOES NOT CONTAIN CFC

DISTAC WELD is a silicone-free anti-spatter aerosol for metal.
It is used as an anti-spatter product for parts to be welded and also as protection for welding torch nozzles.
Thanks to its silicone-free composition, it allows subsequent treatments such as varnishing, galvanising, chrome plating, etc.
It makes welding easier and faster and helps prevent the formation of cracks and crevices.

500 ml aerosol

DIRECTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Spray the product around the parts to be welded at a distance of 25 cm.

SPECIFICATIONS
Base: Mixture of synthetic silicone-free anti-spatter agents
Propellant: Denatured and odourless hydrocarbon, flammable
Appearance: Clear oil
Temperature resistance: Up to 250°
Biodegradability: More than 85%
Film thickness: 2 to 3 microns
CONTAINS NO CFC OR DICHLOROMETHANE

CERAM STAK is used to protect the torch from welding spatter.
Suitable for MIG/TIG torches, laser and plasma cutting, automatic welding machines.
Lubricant for high-temperature surfaces.

500 ml aerosol can

DESCRIPTION
CERAM STAK is an excellent anti-spatter product for protecting the torch tip from droplet adhesion. It lasts several hours (up to 8 hours) and has a superior anti-adhesive effect compared to standard silicone-free anti-spatter products, because it withstands high temperatures.
CERAM STAK is also an excellent lubricant. It deposits a thin dry film that improves action, prevents friction and reduces deformation. It can be used to lubricate work tables, furnaces, foundry slides, and whenever a high-temperature lubricant is needed.

INSTRUCTIONS FOR USE
Apply to the surface to be treated, which must first be thoroughly cleaned and degreased.
Shake the aerosol for at least one minute. During application, shake the aerosol regularly to keep the product homogeneous.
Spray the product from a distance of 15 cm to deposit a thin film.
After use, shake the aerosol for a few seconds to unblock the valve.
Shelf life is 2 years from the date of manufacture.

SPECIFICATIONS
Base: Microfine ceramic
Propellant: Denatured odourless hydrocarbon
Appearance: White dry film
Temperature resistance: 1500°C – at 200° the resins blend and become a nano-ceramic powder.
Drying time: 5 minutes
Contains no CFCs or silicone.

ANTITEK® is a new generation water-based anti-spatter aerosol, harmless to users. Thanks to its composition, silicone-free and with selected raw materials, ANTITEK® allows subsequent and successive surface treatments (painting, galvanizing or chrome treatment)
ANTITEK® is used to prevent the adhesion of impurities or spatter on welded elements or on the wear parts of welding torches.

500 ml aerosol

INSTRUCTIONS FOR USE
Spray around the end of the torch or on the metal to be welded or cut.
Do not spray on welding strips.
Shake before use.
Apply a first burst into the air when the aerosol is new.
Spray at a distance of 25-30 cm from the parts to create a film that will prevent spatter. Do not spray too long, or closer than 25 cm from the part.
Do not spray an excessive amount of product.
Degrease the welded part with detergent products before proceeding with surface treatments.
Use-by date: 10 months from the production date indicated on the aerosol.

CHARACTERISTICS
Base: Synthetic oil mixed with water base. SILICONE-FREE.
Propellant: Mixed, denatured, non-toxic, ecological gas.
Appearance: Clear liquid
Viscosity at 25°C: 20-50 cst
Odor: None
Anti-spatter performance: Very good

ALUSIL is a spray product containing a high level of aluminum. It is suitable for welding touch-ups and for protecting aluminum parts from oxidation.
It forms a film that restores and protects aluminum surfaces.
It can be painted over or left without a final protective coating.

400 ml aerosol

INSTRUCTIONS FOR USE
Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve blockage.

CHARACTERISTICS
Base: Pure aluminum paint
Propellant: Odorless denatured hydrocarbon
Coverage power: High
Dry film thickness: 15/20 microns
Drying: Fast
Temperature resistance: High
Color: Metallic
Specific gravity: 0.9 kg/lt
Dry residue: Approximately 30'

ZINCONSIL 400 is to be used for cold galvanizing on all metallic materials with a high zinc content.
This aerosol product with a high zinc content is particularly suitable for touch-ups after welding, for restoration or galvanizing of metal sheets, for galvanizing and protecting metal parts outdoors, and for restoring the zinc surfaces of grilles, gates, sheets, tanks and metal structures.
The aerosol is fitted with a drip-free diffuser; its use does not cause stains.
ZINCONSIL 400 also provides good protection against corrosion caused by atmospheric agents such as salinity and humidity.

500 ml aerosol

PROPERTIES
High zinc content
Fast drying, drip-free
High covering power
Durable protection
High resistance to corrosion, atmospheric agents and oxidation
Paintable
Colour identical to galvanizing

INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from clogging.

Dry film thickness: 20 to 40 µm (cross-coat coverage)
Covering power: high
Coverage capacity: approx. 120 ml/m²
Drying time: 5 to 10 minutes. Fast drying, drip-free

PROTECT 700 is an anti-spatter liquid used to prevent the adhesion of slag or welding spatter.
This product contains no silicone and therefore allows subsequent surface treatments (painting, galvanizing, chromating).
PROTECT 700 can be used in an enclosed space as it is neither flammable nor toxic.
It can be diluted with water in a ratio of 1 to 5; for welding robots, it is recommended to dilute the product with water in a ratio of 1 to 1; for application with a pump, it is possible to use the product pure or diluted 1 to 1.

Base: Synthetic oil, silicone-free.
Appearance: Light yellow
Viscosity at 25°C: 30-100 cSt (Brookfield)
Temperature resistance: from -2°C to +200°C
Biodegradability: over 80%
Dilution: with water in all proportions
pH: 7 to 8
Non-flammable, non-toxic, odorless.

INSTRUCTIONS FOR USE
• Fill a sprayer:
• Spray at 20 cm from the part to be protected
• Deposits a thin, uniform film facilitating the rapid removal of welding spatter
• Remove with a degreaser or cleaner before galvanizing or painting the part(s) that have received SOUDURE ANTI GRATTONS

 It is also possible to apply this anti-spatter product with a brush on the surface to be treated.

Coolant liquid for MIG-MAG or TIG torch cooling system 5L container

This brush is used for applying stainless steel cleaning products.
Plastic handle, acid-resistant.

Brush width 30 mm
Handle length 30 cm

Silicone-free anti-spatter spray for protection of contact tips and gas nozzles.
Volume 400 ml
For use on cold parts, compatible with paint.

Stainless steel weld cleaning liquid for small weld beads
1 L can.
Applied with a suitable brush. Reference 981863

Ceramic-based anti-spatter spray with very fast drying that protects welding equipment and wear parts against welding spatter.

Extremely fast drying (a few seconds)
Long-lasting hold and resistance of the protective film

Ceraskin guarantees 8 hours of continuous welding work without needing to reapply the product

NETMIG is a paste that prevents welding spatter from adhering to nozzles or contact tips.
Does not clog orifices or threads
Does not cause porosity
Solvent-free, silicone-free and odourless.

Compatible with all MIG-MAG torches except fume extraction torches.

Volume 300g

Final treatment phase to restore the stainless property of steel

Available in 2 and 10 kg pots in gel form

Removes oxides after stainless steel welding.

Available in 2 kg and 10 kg jars in paste form

Pickling is the operation that removes all oxides after welding, by eliminating the surface layer depleted as a result of heat treatment.
It is the most important step in the treatment process.
It should be noted that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not only mean cleaning the weld beads but primarily consists of restoring the characteristics of stainless steel.

How to use Picklinox paste?

Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable period depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.

Removes oxides after stainless steel welding.

Available in 2 kg and 10 kg tubs in gel form

Pickling is the operation that removes all oxides after welding, by removing the surface depleted as a result of heat treatment.
It is the most important step in the treatment process.
It must be taken into account that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not simply mean cleaning the weld beads but primarily consists of restoring the stainless steel's characteristics.

How to use Picklinox paste?

Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable time depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.

Marking kit for Cleantech 200 Telwin

Cleaning brush kit for Cleantech 200 Telwin
This item is used when cleaning with the BRUSH IT cleaner
These brushes are suitable for cleaning small weld beads

Stainless steel weld cleaning liquid for small weld beads
1 L or 5 L container.
Applied with a suitable brush. 

Stainless steel weld cleaning liquid for wide or long weld beads
1 L container.
Applied with a suitable pad. Reference 981866

Cleaning pad kit for Cleantech 200 Telwin
This item is used when cleaning with the CLEAN IT cleaner
These pads are suitable for cleaning large weld beads

Cutting fluid, lubricant and coolant, compatible with all metals.
Adheres strongly to the tool and allows for high working speeds.

Prevents wear, corrosion and ensures better performance, reduces friction and facilitates machining operations.
Resistant to oxidation and high temperatures.
Produces virtually no fumes, approved for incidental food contact.

The active ingredient of the SOUDURE ANTI-GRATTONS is effective over time and benefits from high anti-adhesion properties that prevent the adhesion of metal spatter and weld spatters on welding torch nozzles or any surfaces near the work area. Formulated without chlorinated or petroleum solvents, the SOUDURE ANTI-GRATTONS is neither toxic nor irritating.

Thanks to its specific water-based formulation, the SOUDURE ANTI-GRATTONS is non-flammable, releases no unpleasant odour and generates neither smoke nor dangerous vapours for the user during welding operations. The SOUDURE ANTI-GRATTONS is 92% biodegradable.

The SOUDURE ANTI-GRATTONS rinses off very easily with water and contains corrosion inhibitors. Silicone-free, it is compatible with post-finishing operations and can be used on surfaces that are to be painted, bonded or varnished.

The SOUDURE ANTI-GRATTONS is particularly recommended when you want to avoid any trace of grease on metal surfaces. It also facilitates the demoulding of parts made of polyurethane, polyester, epoxy, various plastics or rubber moulded by injection, compression or casting.

SOUDURE ANTI GRATTONS Silicone-free water-based anti-adhesion spray

MAIN CHARACTERISTICS
• Water-based formula without chlorinated or petroleum solvents
• Prevents the adhesion of molten metal spatter: welding spatter.
• Non-flammable
• Easy removal of welding spatter by simple brushing
• Transparent film in the form of micro-droplets
• Long-lasting protection
• Releases no vapour or smoke
• No unpleasant odour • Mould release action
• Contains a corrosion inhibitor
• Very easy removal of the SOUDURE ANTI GRATTONS film
• Silicone-free to facilitate post-finishing operations

FIELDS OF APPLICATION
• Protection of the welding station environment
• Protection of parts before welding
• Nozzle, soldering iron tip
• Welding robots
• Steel or aluminium moulds • Mould release agent for plastic injection moulding

The DETECT FUITES is a water-based product containing an antifreeze additive, anti-corrosion additives and surfactants that give it very high efficiency in immediately locating gas leaks on all circuits. It can be used with all types of gas (compressed air, hydrocarbons, CO2, nitrogen… except pressurised oxygen)
The DETECT FUITES works by forming air bubbles around the gas leak. The DETECT FUITES is frost-resistant and can be used down to -20°C.
The DETECT FUITES is over 80% biodegradable.
Safe to use on pneumatic circuits, fittings, valves, taps, safety valves or cylinders.

MAIN FEATURES
• Immediately visible detection
• Instant bubble or foam formation
• Neutral towards substrates
• Non-flammable
• Over 99% biodegradable
• Leaves no residue
• Contains anti-corrosion agents
• Formulated with an antifreeze agent -20°C
• Do not use on pressurised oxygen — use DETECTO FUITES Ref.: 005511
• Aerosol usable in all positions
FIELDS OF APPLICATION
• Suitable for detecting leaks of:
• Compressed air, CO², Nitrogen
• Butane, Propane
• Gas used in air conditioning systems
• Refrigerant gas
• Leak detection on: • Pipework, • Valves, • Fittings, • Gate valves, • Safety valves, • Gas cylinders

Net capacity 400 ml - 650 ml aerosol can.
Made in France.

3 products for complementary use:

PENETRANT:
Red dye used to highlight small defects that may cause leaks.

DEVELOPER:
White powder product. It is used in conjunction with the PENETRANT and highlights small defects that may cause leaks.
Its white powder draws out by capillary action the red penetrant embedded in the crack from a thickness of 30 microns.
Easy to apply, non-destructive testing.

CLEANER:
Surface cleaner to be used before and after dye penetrant testing.
Penetrates into the smallest cracks and removes excess PENETRANT.

This brush is used for applying stainless steel cleaning products.
Plastic handle, acid-resistant.

Two diameters available: 6 and 8 mm

The Lincoln Freezcool special welding coolant is a ready-to-use heat transfer fluid. It contains an algaecide that limits fouling caused by algae growth in the cooling system.
Its thermal stability and dielectric properties make it a coolant particularly suited to high-technology circuits.

Fields of application:
Cooling of welding torches
Cooling of induction furnaces
Cooling of spot welding circuits, plasma torches

Non-volatile (no product loss), antifreeze protection down to -27°C - does not polarize, non-toxic and non-flammable, anti-corrosion and anti-algae.

Supplied in a 9.6 L container

Special welding coolant is essential for optimizing and preserving the performance of your spot welder's cooling system, and is also suitable for other welding processes. Its unique formula, anti-corrosive and low-conductivity, reduces the effects of electrolysis. The special welding coolant prevents the build-up of deposits and blockage of the cooling circuit compared to a standard coolant.

Its advantages:

1) Its low conductivity limits the risk of electrolysis in the cooling circuit and prevents deposits responsible for blockages in the cooling circuit.
2) Anti-corrosive in contact with heavy metals.
3) Frost-resistant down to -20°C, for operation even in the most demanding conditions.
4) Its ready-to-use formula can be used pure without any dilution.

Available in two packaging sizes of 5 or 10 litres

3 products are available for 3 different results after application:

Galva Flash

The durable protection, extreme brilliance.
Protective coating for galvanized steel. Identical appearance to molten zinc straight from a hot-dip galvanizing bath.
Mirror finish for touching up new galvanized parts and welds.
Excellent corrosion resistance (3000 hours salt spray testing). Smooth and flexible film offering good abrasion resistance

Matt Galva

The anti-corrosion shield.
Durable cold galvanizing coating, matt finish. Very high zinc content (99%).
Dual protection: physical and cathodic for touching up and protecting welds.
Excellent corrosion resistance (2500 hours salt spray testing).
Very good adhesion on bare steel or existing paint. Can be overcoated with many varnishes or paints.
Resists without deterioration up to 350°. Good covering power and fast drying.

Gloss Galva

The brilliant protection.
Cold galvanizing coating with gloss finish.
Product designed for touch-ups and protection of welds.
Fine spray providing a magnificent metallic appearance. Dual chemical and mechanical protection.
Very good corrosion resistance (200 hours salt spray testing).
Resists without deterioration up to 350°.
Fast drying, handleable after 15 minutes.