SILICONI | ALUSIL Aluminum paint

This brush is used for applying stainless steel cleaning products.
Wooden handle, acid-resistant.

Brush width 30 mm
Handle length 30 cm

ZINCONSIL 430 is used for cold galvanising on all metals. An aerosol with a high zinc content used particularly for touch-ups on welds, to restore or galvanise metal parts, to galvanise and protect bolts exposed to weathering for long periods, to restore grilles, gates, metal parts, containers and metal structures.
ZINCOSIL 430 is also an effective protector against corrosion from atmospheric agents, salt and moisture.

400 ml aerosol

PROPERTIES:
- Contains no chlorinated solvents,
- High zinc content,
- Fast drying,
- Does not drip,
- High coverage power,
- High corrosion resistance,
- Good resistance to atmospheric agents, washing agents, oxidising agents.
- Colour identical to galvanising,
- Durable protection
- The aerosol is fitted with an anti-drip diffuser; its use does not cause stains.

INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from becoming blocked.

SPECIFICATIONS
Base: Pure zinc 98% on synthetic backing
Pigment purity:>98%
Propellant: Denatured and odourless hydrocarbon
Appearance: Light grey colour
Dry film thickness: 20 to 40 µm (cross-coat)
Coverage capacity: high
Coverage rate: approx. 120 ml/m²
Temperature resistance: -50°C to +250°C (Metal powder resists up to 700°C)
Drying time: 5 to 10 minutes. Fast drying, does not drip.
Electrical conductivity: high
Abrasion resistance: Very high
Cross-cut: DIN 53151 - ISO 2409 = GTO/GT1
Oxidation resistance: Very good corrosion resistance

DISTAC WELD is a silicone-free anti-spatter aerosol for metal.
It is used as an anti-spatter product for parts to be welded and also as protection for welding torch nozzles.
Thanks to its silicone-free composition, it allows subsequent treatments such as varnishing, galvanising, chrome plating, etc.
It makes welding easier and faster and helps prevent the formation of cracks and crevices.

500 ml aerosol

DIRECTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Spray the product around the parts to be welded at a distance of 25 cm.

SPECIFICATIONS
Base: Mixture of synthetic silicone-free anti-spatter agents
Propellant: Denatured and odourless hydrocarbon, flammable
Appearance: Clear oil
Temperature resistance: Up to 250°
Biodegradability: More than 85%
Film thickness: 2 to 3 microns
CONTAINS NO CFC OR DICHLOROMETHANE

CLINOX Green is a cleaner for stainless steel and chrome surfaces.
CLINOX Green is an innovative product as it contains biodegradable detergents free of hexane and chlorinated compounds, with high detergent power. Furthermore, its formula is highly concentrated in active ingredients, with a reduced propellant content.
It removes rings, grease, oils, and dirt, and leaves a protective film that reduces future scratches and protects machines from stains, dust, marks, and corrosion.
It does not scratch or stain. It contains no substances that could damage, stain, or harm treated surfaces.
CLINOX Green cleans stainless steel surfaces on industrial equipment, kitchens, refrigerators, doors, countertops. Biodegradable. Eco-compatible

500 ml aerosol

DIRECTIONS FOR USE
Shake the dispenser before use.
Spray the product onto a dry cloth and clean the surfaces

SPECIFICATIONS
Base: Biodegradable cleaner
Propellant: Mixture of denatured, odorless and non-toxic propellants
Appearance: White liquid
pH: 6 - 8
Keep away from heat sources and out of direct sunlight.
Store in a dry place at temperatures between +5°C and +35°C.
Shelf life: 12 months

CERAM STAK is used to protect the torch from welding spatter.
Suitable for MIG/TIG torches, laser and plasma cutting, automatic welding machines.
Lubricant for high-temperature surfaces.

500 ml aerosol can

DESCRIPTION
CERAM STAK is an excellent anti-spatter product for protecting the torch tip from droplet adhesion. It lasts several hours (up to 8 hours) and has a superior anti-adhesive effect compared to standard silicone-free anti-spatter products, because it withstands high temperatures.
CERAM STAK is also an excellent lubricant. It deposits a thin dry film that improves action, prevents friction and reduces deformation. It can be used to lubricate work tables, furnaces, foundry slides, and whenever a high-temperature lubricant is needed.

INSTRUCTIONS FOR USE
Apply to the surface to be treated, which must first be thoroughly cleaned and degreased.
Shake the aerosol for at least one minute. During application, shake the aerosol regularly to keep the product homogeneous.
Spray the product from a distance of 15 cm to deposit a thin film.
After use, shake the aerosol for a few seconds to unblock the valve.
Shelf life is 2 years from the date of manufacture.

SPECIFICATIONS
Base: Microfine ceramic
Propellant: Denatured odourless hydrocarbon
Appearance: White dry film
Temperature resistance: 1500°C – at 200° the resins blend and become a nano-ceramic powder.
Drying time: 5 minutes
Contains no CFCs or silicone.

MOLISIL is used as an anti-spatter product to protect the torch "nozzle" against droplet adhesion.
It is a very effective anti-spatter because it contains MOS2 and graphite in slightly higher quantities than a standard anti-spatter product
(oil-based).
MOLISIL can also be used as a lubricant to lubricate moving mechanical parts, prevent friction and reduce wear. It is used for high-temperature lubrication.

500 ml aerosol can

INSTRUCTIONS FOR USE

Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve clogging.

SPECIFICATIONS

Base: Molybdenum disulphide and graphite
Propellant: Odourless denatured hydrocarbon.
Temperature resistance: 700°C
Appearance: Dry grey film
CFC-FREE CHLORINE-FREE

ZINCO 98 is an aerosol with a high zinc content, particularly suitable for welding touch-ups, for restoring or galvanising parts, and for galvanising and protecting nuts and bolts exposed to the weather over a long period.
This product creates a solid, resistant zinc film that protects steel materials from oxidation and can be painted over or left as is. It withstands salt spray for several hours.
The can is fitted with an anti-drip feature to prevent mess during use.

400 ml aerosol

INSTRUCTIONS FOR USE
Concentrated product
Shake the aerosol vigorously for at least 1 minute before use until the ball inside the aerosol is moving.
Never use without shaking the aerosol, otherwise the heavy concentrated zinc powder at the bottom settles inside the nozzle and blocks the valve, rendering the aerosol unusable

SPECIFICATIONS
Base: Pure zinc at 98%
Pigment purity:>98%
Appearance: Dark grey colour
Propellant: Odourless denatured hydrocarbon. Does not contain CFC
Dry film thickness: 30-60 microns
Coverage power: High
Coverage value: approx. 150ml/m2
Drying time: 5-10 minutes (fast drying, does not drip)
Electrical conductivity: High
Abrasion resistance: Very high
Oxidation resistance: Very good corrosion resistance
Temperature resistance: From -50°C to +500°C

This brush is used for applying stainless steel cleaning products.
Plastic handle, acid-resistant.

Brush width 30 mm
Handle length 30 cm

Removes oxides after stainless steel welding.

Available in 2 kg and 10 kg jars in paste form

Pickling is the operation that removes all oxides after welding, by eliminating the surface layer depleted as a result of heat treatment.
It is the most important step in the treatment process.
It should be noted that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not only mean cleaning the weld beads but primarily consists of restoring the characteristics of stainless steel.

How to use Picklinox paste?

Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable period depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.

Final treatment phase to restore the stainless property of steel

Available in 2 and 10 kg pots in gel form

This brush is used for applying stainless steel cleaning products.
Plastic handle, acid-resistant.

Two diameters available: 6 and 8 mm

Silicone-free anti-spatter spray for protection of contact tips and gas nozzles.
Volume 400 ml
For use on cold parts, compatible with paint.

Cutting fluid, lubricant and coolant, compatible with all metals.
Adheres strongly to the tool and allows for high working speeds.

Prevents wear, corrosion and ensures better performance, reduces friction and facilitates machining operations.
Resistant to oxidation and high temperatures.
Produces virtually no fumes, approved for incidental food contact.

3 products are available for 3 different results after application:

Galva Flash

The durable protection, extreme brilliance.
Protective coating for galvanized steel. Identical appearance to molten zinc straight from a hot-dip galvanizing bath.
Mirror finish for touching up new galvanized parts and welds.
Excellent corrosion resistance (3000 hours salt spray testing). Smooth and flexible film offering good abrasion resistance

Matt Galva

The anti-corrosion shield.
Durable cold galvanizing coating, matt finish. Very high zinc content (99%).
Dual protection: physical and cathodic for touching up and protecting welds.
Excellent corrosion resistance (2500 hours salt spray testing).
Very good adhesion on bare steel or existing paint. Can be overcoated with many varnishes or paints.
Resists without deterioration up to 350°. Good covering power and fast drying.

Gloss Galva

The brilliant protection.
Cold galvanizing coating with gloss finish.
Product designed for touch-ups and protection of welds.
Fine spray providing a magnificent metallic appearance. Dual chemical and mechanical protection.
Very good corrosion resistance (200 hours salt spray testing).
Resists without deterioration up to 350°.
Fast drying, handleable after 15 minutes.

ZINCONSIL 400 is to be used for cold galvanizing on all metallic materials with a high zinc content.
This aerosol product with a high zinc content is particularly suitable for touch-ups after welding, for restoration or galvanizing of metal sheets, for galvanizing and protecting metal parts outdoors, and for restoring the zinc surfaces of grilles, gates, sheets, tanks and metal structures.
The aerosol is fitted with a drip-free diffuser; its use does not cause stains.
ZINCONSIL 400 also provides good protection against corrosion caused by atmospheric agents such as salinity and humidity.

500 ml aerosol

PROPERTIES
High zinc content
Fast drying, drip-free
High covering power
Durable protection
High resistance to corrosion, atmospheric agents and oxidation
Paintable
Colour identical to galvanizing

INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from clogging.

Dry film thickness: 20 to 40 µm (cross-coat coverage)
Covering power: high
Coverage capacity: approx. 120 ml/m²
Drying time: 5 to 10 minutes. Fast drying, drip-free

Cleaning brush kit for Cleantech 200 Telwin
This item is used when cleaning with the BRUSH IT cleaner
These brushes are suitable for cleaning small weld beads