This TPT 40 plasma torch is compatible with GYS cutting machines: CUTTER 30 FV - EASYCUT 40 - CUTTER 45CT
Length: 4 m
Ignition voltage: 500V maximum
Maximum rated current: 40 A
Duty cycle at 40°: 40 A@60%
Torch cooling: Air
Recommended pressure/flow rate: 5 bar - 100 l/min
Switch characteristics: (trigger) 0.6A / 125V DC - 0.3A / 250V DC
1 836,98 kr tax excl.
This TPT 40 plasma torch is compatible with GYS cutting machines: CUTTER 30 FV - EASYCUT 40 - CUTTER 45CT
Length: 4 m
Ignition voltage: 500V maximum
Maximum rated current: 40 A
Duty cycle at 40°: 40 A@60%
Torch cooling: Air
Recommended pressure/flow rate: 5 bar - 100 l/min
Switch characteristics: (trigger) 0.6A / 125V DC - 0.3A / 250V DC
Description
Important
The torch must be fitted with the correct consumables, chosen according to the application and the set current. A poor choice of consumable will cause cutting defects, premature wear of consumables and potentially a malfunction of the entire unit. The torch is delivered with a pot of silicone grease to limit seal wear and seizing of metal parts. It is recommended to apply this grease regularly.
Regularly check the wear condition of the protection nozzle, the tip and the electrode, or in the event of a significant reduction in cutting speed. It is recommended to replace the tip and electrode at the same time.
Consumables are wear parts; it is important to know when to replace them. Visually: melted or damaged consumables, nozzle holes>1.5mm, worn electrodes, melted pads… Practically: loss of cutting performance, difficult arc starting on the workpiece, etc.
Regarding the nozzle: Tighten the nozzle so that all parts are firmly locked. The nozzle should not turn easily.
Use compressed air with oil and water filtration.
680.85 kr
221.00 kr
384.25 kr
379.68 kr
Very good
Meets my expectations
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
Supplier stock
Lincoln Electric
Reference: W03X0893-119A
5,711.84 kr
4 569,47 kr tax excl.
Free delivery
2-year warranty
3-in-1 accessory, essential for making straight plasma cuts, cutting a chamfered edge or making very precise circular cuts.
- 2 guide carriages with adjustment screws (torch tightening and support rotation locking).
- 1 compass kit ideal for circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches LC65 - LC105
- Premium quality.
Supplier stock
Telwin
Reference: 804155
2,221.26 kr
2,468.07 kr
1 777,01 kr tax excl.
or 4 x 555,32 kr
Free delivery
2-year warranty
Replacement PH type torch for Telwin Technology 41 XT plasma cutter
EURO connector
Max current: 50 A @35%
Max cutting thickness: 18 mm
Equipped with an air cooling system (operating pressure 5 bar and flow rate between 97 and 110 L/minute)
Length: 4 m
Supplier stock
Telwin
Reference: 802955
10,789.07 kr
8 631,26 kr tax excl.
Free delivery
2-year warranty
This TWIN PX A plasma torch is compatible with TELWIN plasma cutters: Superior Plasma 70 - 100 - 160
It is supplied with a 125 A nozzle.
Length: 12 m
In stock
Lincoln Electric
Reference: W8800117R
1,955.87 kr
1 564,70 kr tax excl.
or 4 x 488,97 kr
Free delivery
2-year warranty
Replacement cartridge to be inserted in the Gys filter reference 039728 or the Lincoln filter reference LAF1250.
In stock
Gys
Reference: 037984
1,834.71 kr
1 467,77 kr tax excl.
or 4 x 458,68 kr
Free delivery
2-year warranty
The compass kit allows you to quickly and precisely cut circles up to 82 cm in diameter.
- Ideal for making circular cuts between 40 and 82 cm in diameter.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.
- "Centre punch" centring guide for precise centring without perforating the sheet metal.
- Compatible with plasma torches MT-70 and MT-125 A
- Premium quality.
Supplier stock
Reference: W100000325
5,008.00 kr
4 006,40 kr tax excl.
Free delivery
2-year warranty
Lincoln LC 30 4M plasma torch FOR LINCOLN TOMAHAWK 30K MACHINE
In stock
Trafimet
Reference: PD0116
221.55 kr
177,24 kr tax excl.
or 3 x 73,85 kr
Free delivery
2-year warranty
10 nozzles for plasma cutter torch available in 3 diameters: 0.6 - 0.8 and 0.9 mm.
Suitable for torches found on the brands
Deca
The IPAC 1235 and IPAC 1235 K models accept nozzles of Ø 0.6 and 0.8 mm.
The D-PAC 60 plasma cutter accepts nozzles of Ø 0.8 and 0.9 mm
These nozzles fit on Trafimet S 25 - S25K - S35 K - S45 and S45 P plasma torches
Before purchasing, check the usable nozzle Ø in your Trafimet torch manual.
In stock
Gys
Reference: 037601
545.84 kr
436,68 kr tax excl.
or 4 x 136,46 kr
Free delivery
2-year warranty
1 protection nozzle 20/70A for plasma torch AT-70 MT-70
In stock
Gys
Reference: 061613
1,603.88 kr
1 283,11 kr tax excl.
or 4 x 400,97 kr
Free delivery
2-year warranty
This complete kit contains:
- 1 nozzle
- 1 diffuser
- 3 x 45 A nozzles
- 3 electrodes
- 1 deflector pad
This kit is compatible with the MT-70 torch model.
In stock
Lincoln Electric
Reference: W100000328
796.20 kr
636,96 kr tax excl.
or 4 x 199,05 kr
Free delivery
2-year warranty
5 medium electrodes for Lincoln plasma cutter torch LC-45, compatible with the original torch supplied with the Tomawak 45
Supplier stock
Gys
Reference: 064720
3,773.27 kr
3 018,62 kr tax excl.
or 4 x 943,32 kr
Free delivery
2-year warranty
This complete kit IS suitable for the Gys Cutter 125 CT plasma torch
Supplier stock
Telwin
Reference: 804108
2,850.10 kr
2 280,08 kr tax excl.
or 4 x 712,53 kr
Free delivery
2-year warranty
This kit for a manual torch includes:
1 torch tip
8 electrodes
3 nozzles 20-50A
5 nozzles 70 A
1 diffuser
This kit is compatible with TELWIN brand plasma cutters;
Reference:
SUPERIOR PLASMA 70
In stock
Lincoln Electric
Reference: W100000340
992.41 kr
793,92 kr tax excl.
or 4 x 248,10 kr
Free delivery
2-year warranty
1 protection cup for LC-45 torch for the Lincoln Tomahawk 45 plasma cutter
Supplier stock
Lincoln Electric
Reference: W03X0893-115A
6,784.97 kr
5 427,98 kr tax excl.
Free delivery
2-year warranty
This kit for Lincoln LC 105 manual torch
It contains:
- 1 nozzle
- 1 gouging nozzle
- 2 diffusers
- 5 nozzles 60 A
- 15 nozzles 100A
- 5 gouging nozzles
- 3 extended nozzles 100 A
- 20 electrodes
- 3 extended electrodes
- 1 standoff guide
- 1 nozzle shield
- 1 nozzle shield for gouging
- 1 extended nozzle shield
- 2 O-rings
1 silicone lubricant for O-ring
Kit adapted to the plasma torch on the cutter
Lincoln Tomahawk 1538
Saf Prestojet 100
In stock
Lincoln Electric
Reference: W0300699A
1,442.43 kr
1 153,94 kr tax excl.
or 4 x 360,61 kr
Free delivery
2-year warranty
This compass kit for single-phase plasma torch is designed for use with Lincoln plasma cutters fitted with a manual LC 25-65 and 105 type torch
This kit includes a wheeled trolley serving as a cutting guide.
This compass kit allows you to quickly and precisely cut a circle with a maximum diameter of 82 cm.
- Magnetic centring guide for fast cuts on all ferrous surfaces.
- Screw-on centring guide for non-metallic materials.- "Centre punch" centring guide for precise centring without perforating the sheet metal.
In stock
Gys
Reference: 038653
6,681.12 kr
5 344,89 kr tax excl.
Free delivery
2-year warranty
3-in-1 accessory, essential for making straight plasma cuts, cutting a chamfered edge or making highly precise circular cuts.
- 2 guide carriages with adjustment screws (torch tightening and support rotation lock).
- 1 compass kit ideal for circular cuts between 40 and 82 cm in diameter.
- Magnetic centering guide for fast cuts on all ferrous surfaces.
- Screw-on centering guide for non-metallic materials.
- "Centre punch" centering guide for precise centering without perforating the sheet metal.
- Compatible with MT-70 and MT-125 A plasma torches
- Premium quality.
This TPT 40 plasma torch is compatible with GYS cutting machines: CUTTER 30 FV - EASYCUT 40 - CUTTER 45CT
Length: 4 m
Ignition voltage: 500V maximum
Maximum rated current: 40 A
Duty cycle at 40°: 40 A@60%
Torch cooling: Air
Recommended pressure/flow rate: 5 bar - 100 l/min
Switch characteristics: (trigger) 0.6A / 125V DC - 0.3A / 250V DC
Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
