Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Magnetic holder for MIG torch
Reference: MIMTSM
Magnetic holder for MIG torch
114.79 kr
91,83 kr tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Magnetic holder for MIG torch
Customer reviews
Product reviews
-
Very good
-
Very good quality
-
Perfect!
-
Very good
-
Good product
-
Product ok
-
Hello. Great, as usual. Fast efficient quality. Everything is said. Continue. Cdlt
-
Not yet used
-
?
-
impeccable!
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Oxyturbo
Reference: OXY215
(257 reviews)
460.41 kr
368,33 kr tax excl.
or 4 x 115,10 kr
Free delivery
2-year warranty
Flow regulator for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O²
The maximum flow rate possible with this regulator is 6 litres per minute when fully open
M10 thread
Quick connector for Ø 4 mm outer diameter hose
Depending on the model and brand of your welding machine, the connection kit reference 990702 may be required to connect this regulator to your welder
3 models are available:
Without gauge
With one gauge to adjust the flow rate precisely
With two gauges to check the cylinder fill level and adjust the flow rate precisely
Regulators accepting gas hoses with 4 mm inner diameter
In stock
StrongHandTools
Reference: MS2
(2 reviews)
1,442.43 kr
1 153,94 kr tax excl.
or 4 x 360,61 kr
Free delivery
2-year warranty
The quick and easy way to hold round or flat workpieces
Two on/off switches for independent operation
2 sizes are available:
MS2-80: pulling force 55 kg - Dimensions 152 x 152 x 38 mm.
MS2-90: pulling force 120 kg - Dimensions 197 x 197 x 48 mm
Supplier stock
Telwin
Reference: 742576 TELW-GAL2-ACIER
(1 review)
167.27 kr
133,82 kr tax excl.
or 3 x 55,76 kr
Free delivery
2-year warranty
2 double-groove rollers for Telwin MIG-MAG welding machine for steel or stainless steel wire, available for wire diameters: 0.6 / 0.8 mm and 1 / 1.2 mm
Compatible with Telwin welding machines:
TECHNOMIG 243 WAVE - 223 TREO 240 - 260
ELECTROMIG 230 - 300 Synergic - 330 Wave - 430 WAVE - 550 SYNERGIC - 281/2 Turbo - 400 - 450 SYNERGIC -
MASTERMIG 270/2 - 300 400 - 500
SUPERMIG 380
SUPERIOR 400 MIG PACK - 630 MIG PACK
INVERPULSE 60.30- 60.40
In stock
Lincoln Electric
Reference: ED016354
(3 reviews)
1,996.30 kr
1 597,04 kr tax excl.
or 4 x 499,08 kr
Free delivery
2-year warranty
Main Characteristics
- Suitable for outdoor use on site in winds up to 50 km/h
- All-position welding (including downhill) of sheet metal up to 12 mm thickness
- Suitable for thin sheet> 1.2 mm with Ø 0.9 mm
- Excellent choice for welding galvanised steels
Applications
- Metal sheet or thin sheet scrap.
- Galvanised metal scrap
- Robotic/automatic applications
- General fabrication
- Maximum plate thickness: 5/16" for tubes up to 0.045" diameter for 0.045" (1.14 mm)
- Maximum plate thickness: 1/2" (12.7 mm) for tubes from 0.068 to 3/32" diameter.
Welding Positions
All positions
Spool weight: 4.5 kg
In stock
Gys
Reference: 072336
(1 review)
576.45 kr
461,16 kr tax excl.
or 4 x 144,11 kr
Free delivery
2-year warranty
This kit is suitable for the GYS MULTIPEARL 210-2 welding machine
It includes:
- 1 plastic ring
- 3 ceramic nozzles "No Gas"
- 1 type A roller with 2 grooves for flux-cored wire Ø 0.9/1.0 & 1.2 mm
- 3 contact tips Ø 0.9/1.0 mm
In stock
Le Lorrain
Reference: 510135
(32 reviews)
39.19 kr
31,35 kr tax excl.
Fast delivery
2-year warranty
Welding hose for neutral gas: Argon and Argon mixed with Co²
Material: rubber + knitted reinforcement
Resistance: 20 Bar
Inner diameter 6.3 mm
This hose meets the EN559 standard
There is no expiry date on this type of gas hose; its replacement depends on its condition
Sold per linear metre
Maximum length 40 m
In stock
Sacit
Reference: KIT-251/259
(3 reviews)
492.67 kr
394,14 kr tax excl.
or 4 x 123,17 kr
Free delivery
2-year warranty
NEVADA 3 ground clamp with 25 mm² cable, length 3m (KIT-251) or 4m (KIT-259)
Duty cycle 200 A @60% - 250A @ 35%
Dinse TX 50 connector
H01N2-D-HAR rubber electrical wiring
Electrogalvanized steel sheet clamp with brass contacts bridged by a copper braid. Cable secured with a copper strip and steel cable clamp
Maximum opening 45 mm.
In stock
Gys
Reference: GYS-GAL1A-ACIER
(23 reviews)
194.83 kr
155,86 kr tax excl.
or 3 x 64,94 kr
Free delivery
2-year warranty
Double-groove drive roll for GYS MIG-MAG machine for steel or stainless steel wire, available for diameters:
0.6 / 0.8 mm.
0.8 / 1 mm
Compatible with GYS machines:
Smartmig 142 -152 - 162 - 182 - 183 3P
Easymig 150 - 160 - 160XL
Sparmig 140 - 160
Multipearl 200-2
Multiweld
Supplier stock
DECA
Reference: DECA-GAL-JOB220
(2 reviews)
159.79 kr
127,83 kr tax excl.
or 3 x 53,26 kr
Free delivery
2-year warranty
The drive rolls listed below are compatible with the following DECA welding machines:
JOB 220 LAB
MIGA 225 XL
for welding wire:
Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm
In stock
Lincoln Electric
Reference: W10430-36
1,661.63 kr
1 329,30 kr tax excl.
or 4 x 415,41 kr
Free delivery
2-year warranty
Lincoln LGS3 360G torch - EURO connector.
Available length 3 - 4 and 5 m
- Ergonomic handle for comfortable welding day after day
- Cable articulation via unique and flexible ball joint for comfortable welding in all positions.
Duty cycle 330 A @ 60% (CO² gas)
For wire diameter 0.8 to 1.6 mm
Supplied with a contact tip Ø 1.2 mm (M8 thread) and a conical gas nozzle Ø 16 mm.
Supplier stock
Trafimet
Reference: MC0527P
(1 review)
143.18 kr
114,54 kr tax excl.
Free delivery
2-year warranty
2 gas nozzles Ø 16mm
Length 84 mm.
This nozzle fits onto the end of your MIG 350 A torch
Its role is to direct the gas flow towards the weld and the molten wire.
Suitable for machines equipped with a 320 A @ 60% torch
DECA
Reference: 010841
(35 reviews)
146.55 kr
117,24 kr tax excl.
Free delivery
2-year warranty
This kit includes
1 roller for use with steel or stainless steel wire Ø 0.6 - 0.8 and 1 mm
1 roller for use with flux-cored wire Ø 0.8 - 0.9 and 1.2 mm
1 roller for use with aluminium wire Ø 0.8 and 1 mm
In stock
Telwin
Reference: 742575
(2 reviews)
114.93 kr
91,94 kr tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 0.6 and 0.8 mm
Compatible with TELWIN welders:
TECHNOMIG 215 Dual Synergic - 223 TREO - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic -300 SYN. - 230,330 WAVE-
MASTERMIG 220/2 - 270-2 - 300
TELMIG 281/2
In stock
Lincoln Electric
Reference: W000011138
(2 reviews)
1,165.49 kr
932,39 kr tax excl.
or 4 x 291,37 kr
Free delivery
2-year warranty
This kit includes:
1 Caïman 200 electrode holder + 25 mm² cable 3 m long
1 Hippo 200 earth clamp + earth cable 3 m long
Connector diameter 9 mm
In stock
StrongHandTools
Reference: MST327
(23 reviews)
328.31 kr
262,65 kr tax excl.
or 4 x 82,08 kr
Free delivery
2-year warranty
Holds 2 pieces at angles
Practical: positioned on the outside, they leave clear space for tack welding from the inside
Various positioning angles available: 60-90-120°
Dimensions 83 x 95 x 16mm
In stock
Kemppi
Reference: MG000601
(1 review)
911.54 kr
729,23 kr tax excl.
or 4 x 227,89 kr
Free delivery
2-year warranty
This kit includes:
10 contact tips Ø 0.8 M6 steel / stainless steel
5 contact tips Ø 1.0 M6 steel / stainless steel
2 gas diffusers
2 insulating rings
2 gas nozzles
Magnetic holder for MIG torch