Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
- Out of stock
This support kit for disposable gas cylinders allows you to hold disposable welding gas cylinders with a volume of 1 L or 2.2 L.
It is suitable for DECA machines:
Decastar 135 EVO.
Startwin 135 EVO.
Reference: KITBOUT
DECA disposable gas cylinder support kit
55.39 kr
44,31 kr tax excl.
Out of stock
This support kit for disposable gas cylinders allows you to hold disposable welding gas cylinders with a volume of 1 L or 2.2 L.
It is suitable for DECA machines:
Decastar 135 EVO.
Startwin 135 EVO.
Customer reviews
Product reviews
-
Support a little weak but does the job.
-
Not yet installed
-
this one we had but the auto welding wire and bottle without co2 not
-
Ok
-
Practical for stabilizing the bottle
-
Good value for money
-
good for disposable bottles
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
Oxyturbo
Reference: OXY215
(257 reviews)
460.41 kr
368,33 kr tax excl.
or 4 x 115,10 kr
Free delivery
2-year warranty
Flow regulator for disposable Argon gas cylinder and pure argon mixture - Argon +CO2 - Argon +O²
The maximum flow rate possible with this regulator is 6 litres per minute when fully open
M10 thread
Quick connector for Ø 4 mm outer diameter hose
Depending on the model and brand of your welding machine, the connection kit reference 990702 may be required to connect this regulator to your welder
3 models are available:
Without gauge
With one gauge to adjust the flow rate precisely
With two gauges to check the cylinder fill level and adjust the flow rate precisely
Regulators accepting gas hoses with 4 mm inner diameter
In stock
DECA
Reference: DECA-2GAL-JOB522
374.97 kr
299,98 kr tax excl.
or 4 x 93,74 kr
Free delivery
2-year warranty
The drive rolls listed below are compatible with the following DECA welding machines:
JOB 522 and 523 LAB
for welding wire:
Steel or stainless steel Ø 0.6 / 0.8 mm
Steel or stainless steel Ø 1 / 1.2 mm
In stock
Trafimet
Reference: MC0568
(1 review)
155.50 kr
124,40 kr tax excl.
or 3 x 51,83 kr
Free delivery
2-year warranty
2 gas nozzles Ø 16 mm - Length 76 mm
Steel thickness 2.5 mm.
Suitable for use on a 500 A torch
In stock
Lincoln Electric
Reference: KP10441
(17 reviews)
104.96 kr
83,97 kr tax excl.
Fast delivery
2-year warranty
10 contact tips for steel or stainless steel welding designed for Lincoln torch LGS 250 G - LGP 250 G - LGP 250 G FX - LG 250 G-E
M6 thread Length 28 mm.
3 diameters available: 0.8 - 1 and 1.2 mm.
In stock
Telwin
Reference: 742575
(2 reviews)
114.93 kr
91,94 kr tax excl.
Fast delivery
2-year warranty
Telwin drive roller for MIG steel welding wire Ø 0.6 and 0.8 mm
Compatible with TELWIN welders:
TECHNOMIG 215 Dual Synergic - 223 TREO - 225 - 243 WAVE - 240- 260
ELECTROMIG 220 Synergic -300 SYN. - 230,330 WAVE-
MASTERMIG 220/2 - 270-2 - 300
TELMIG 281/2
In stock
Gys
Reference: 041868
(18 reviews)
79.62 kr
63,70 kr tax excl.
Fast delivery
2-year warranty
Special nozzle for gasless welding
Suitable for all MB15 type torches
In stock
Trafimet
Reference: GM0512
97.48 kr
77,99 kr tax excl.
Fast delivery
2-year warranty
Wire liner for steel or stainless steel wire - Length 5 m for wire Ø 1 and 1.2 mm.
Inner diameter 2 mm and outer diameter of the liner 4.6 mm
In stock
Trafimet
Reference: MC0020
(15 reviews)
77.27 kr
61,81 kr tax excl.
Fast delivery
2-year warranty
This spot welding nozzle fits onto the end of your MIG torch and guides you in your spot welding work by allowing you to see your welding spot, unlike a standard gas nozzle.
Very useful for bodywork or thin sheet metal work.
It is suitable for any torch brand with a duty cycle of 150A @ 60%
Length 61.5 mm
Diameter: 16 mm
In stock
Trafimet
Reference: MC0026
155.50 kr
124,40 kr tax excl.
or 3 x 51,83 kr
Free delivery
2-year warranty
2 gas nozzles Ø 12 mm
Length 84 mm.
This nozzle fits on the end of your Trafimet Ergoplus 36 MIG torch.
Its role is to direct the gas flow toward the weld and the melting wire.
Suitable for welders equipped with a 320 A @ 60% torch
In stock
Trafimet
Reference: ME0076
(1 review)
39.05 kr
31,24 kr tax excl.
Fast delivery
2-year warranty
M8 threaded contact tube holder for Ergoplus torch type 400 / 500 / 600 and 601
In stock
Gys
Reference: 041332
(40 reviews)
425.79 kr
340,63 kr tax excl.
or 4 x 106,45 kr
Free delivery
2-year warranty
Special pliers for MIG/MAG torch
Uses:
- To clean the inside of the nozzle
- Cut excess wire at the torch outlet before the welding operation
- Assists in unscrewing the contact tip or gas nozzle from the torch.
- Suitable for gas nozzles sz Ø 12 to 15 mm.
In stock
Trafimet
Reference: KCF
(5 reviews)
37.11 kr
29,69 kr tax excl.
Fast delivery
2-year warranty
1 Female quarter-turn connector.
In stock
StrongHandTools
Reference: MS
(17 reviews)
253.81 kr
203,05 kr tax excl.
or 3 x 84,60 kr
Free delivery
2-year warranty
The quick and easy way to hold parts.
Equipped with a central hole for easier gripping
Several angle options depending on the chosen model:
MS 45: pulling force 30 kg - Dimensions 111x95x19mm - Angles 45 and 90°
MS 60: pulling force 25 kg - Dimensions 111x95x19mm - Angles 60 and 90°
MS346C: pulling force 40 kg - Dimensions 140x111x19mm - Angles 45 - 60 and 90°
Supplier stock
Jelt
Reference: Jelt-58
(18 reviews)
141.38 kr
113,10 kr tax excl.
Free delivery
2-year warranty
3 products are available for 3 different results after application:
Galva Flash
The durable protection, extreme brilliance.
Protective coating for galvanized steel. Identical appearance to molten zinc straight from a hot-dip galvanizing bath.
Mirror finish for touching up new galvanized parts and welds.
Excellent corrosion resistance (3000 hours salt spray testing). Smooth and flexible film offering good abrasion resistance
Matt Galva
The anti-corrosion shield.
Durable cold galvanizing coating, matt finish. Very high zinc content (99%).
Dual protection: physical and cathodic for touching up and protecting welds.
Excellent corrosion resistance (2500 hours salt spray testing).
Very good adhesion on bare steel or existing paint. Can be overcoated with many varnishes or paints.
Resists without deterioration up to 350°. Good covering power and fast drying.
Gloss Galva
The brilliant protection.
Cold galvanizing coating with gloss finish.
Product designed for touch-ups and protection of welds.
Fine spray providing a magnificent metallic appearance. Dual chemical and mechanical protection.
Very good corrosion resistance (200 hours salt spray testing).
Resists without deterioration up to 350°.
Fast drying, handleable after 15 minutes.
In stock
StrongHandTools
Reference: MAV120
(1 review)
2,838.06 kr
2 270,44 kr tax excl.
or 4 x 709,52 kr
Free delivery
2-year warranty
Adjustable magnetic square from 30 to 275° Fast and efficient for holding round or flat pieces together. Handle to adjust and lock the desired angle
In stock
Le Lorrain
Reference: 150375
(11 reviews)
225.01 kr
180,01 kr tax excl.
or 3 x 75,00 kr
Free delivery
2-year warranty
Quick coupling for connecting 2 hoses
Stepped olive allowing connection of hoses with Ø 4 to 6 mm inner diameter
This support kit for disposable gas cylinders allows you to hold disposable welding gas cylinders with a volume of 1 L or 2.2 L.
It is suitable for DECA machines:
Decastar 135 EVO.
Startwin 135 EVO.