Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
Tri-material handle
Aluminum frame
2-position cutting adjustment: 90° / 45°
Quick blade change via knob in the handle
Supplied with one bi-metal blade *** and a blade holder handle
Reference: D159
Professional hacksaw
228.47 kr
182,78 kr tax excl.
In stock
Shipping within 24h
Delivery in 24-48h
Tri-material handle
Aluminum frame
2-position cutting adjustment: 90° / 45°
Quick blade change via knob in the handle
Supplied with one bi-metal blade *** and a blade holder handle
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
dbp
Reference: MATTRA127
146.50 kr
117,20 kr tax excl.
Free delivery
2-year warranty
This brush is used for applying stainless steel cleaning products.
Wooden handle, acid-resistant.
Brush width 30 mm
Handle length 30 cm
In stock
Telwin
Reference: 804031
334.68 kr
267,74 kr tax excl.
or 4 x 83,67 kr
Free delivery
2-year warranty
Stainless steel weld cleaning liquid for wide or long weld beads
1 L container.
Applied with a suitable pad. Reference 981866
In stock
RHODIUS
Reference: XT77
(14 reviews)
17.86 kr
14,29 kr tax excl.
Fast delivery
2-year warranty
Cut-off disc producing minimal burr, used at high cutting speeds and generating few sparks
Enables cutting of steel
Suitable for cutting rebar, sheet metal and hardened steel
Available in 2 thicknesses: 1 and 1.5 mm - Bore 22.23
These thin discs are particularly useful for cutting solid or thin materials (less than 3 mm)
Their advantages:
Minimal thermal stress
Reduced friction on the workpiece
Reduced blue discolouration
Cut almost burr-free
In stock
SILICONI
Reference: PROTECT 700
(1 review)
633.49 kr
506,80 kr tax excl.
or 4 x 158,37 kr
Free delivery
2-year warranty
PROTECT 700 is an anti-spatter liquid used to prevent the adhesion of slag or welding spatter.
This product contains no silicone and therefore allows subsequent surface treatments (painting, galvanizing, chromating).
PROTECT 700 can be used in an enclosed space as it is neither flammable nor toxic.
It can be diluted with water in a ratio of 1 to 5; for welding robots, it is recommended to dilute the product with water in a ratio of 1 to 1; for application with a pump, it is possible to use the product pure or diluted 1 to 1.
Base: Synthetic oil, silicone-free.
Appearance: Light yellow
Viscosity at 25°C: 30-100 cSt (Brookfield)
Temperature resistance: from -2°C to +200°C
Biodegradability: over 80%
Dilution: with water in all proportions
pH: 7 to 8
Non-flammable, non-toxic, odorless.
INSTRUCTIONS FOR USE
• Fill a sprayer:
• Spray at 20 cm from the part to be protected
• Deposits a thin, uniform film facilitating the rapid removal of welding spatter
• Remove with a degreaser or cleaner before galvanizing or painting the part(s) that have received SOUDURE ANTI GRATTONS
It is also possible to apply this anti-spatter product with a brush on the surface to be treated.
In stock
FISCHER-DAREX
Reference: 792942
565.37 kr
452,29 kr tax excl.
or 4 x 141,34 kr
Free delivery
2-year warranty
Pliers for riveting and nut insertion.
Supplied with an assortment of 40 rivets Ø 2.4 - 3.2 - 4 and 4.8 mm
Allows insertion of nuts type M3 - M4 - M5 - M6
In stock
FISCHER-DAREX
Reference: 804300
(7 reviews)
111.88 kr
89,51 kr tax excl.
Fast delivery
2-year warranty
Locking pliers length 230 mm.
Serrated jaws for a firm grip
4-position rack for adjusting clamping up to 60 mm and 30 mm depth.
Adjustable clamping force via knob.
SILICONI
Reference: ZINCO 98
(2 reviews)
91.80 kr
73,44 kr tax excl.
Fast delivery
2-year warranty
ZINCO 98 is an aerosol with a high zinc content, particularly suitable for welding touch-ups, for restoring or galvanising parts, and for galvanising and protecting nuts and bolts exposed to the weather over a long period.
This product creates a solid, resistant zinc film that protects steel materials from oxidation and can be painted over or left as is. It withstands salt spray for several hours.
The can is fitted with an anti-drip feature to prevent mess during use.
400 ml aerosol
INSTRUCTIONS FOR USE
Concentrated product
Shake the aerosol vigorously for at least 1 minute before use until the ball inside the aerosol is moving.
Never use without shaking the aerosol, otherwise the heavy concentrated zinc powder at the bottom settles inside the nozzle and blocks the valve, rendering the aerosol unusable
SPECIFICATIONS
Base: Pure zinc at 98%
Pigment purity:>98%
Appearance: Dark grey colour
Propellant: Odourless denatured hydrocarbon. Does not contain CFC
Dry film thickness: 30-60 microns
Coverage power: High
Coverage value: approx. 150ml/m2
Drying time: 5-10 minutes (fast drying, does not drip)
Electrical conductivity: High
Abrasion resistance: Very high
Oxidation resistance: Very good corrosion resistance
Temperature resistance: From -50°C to +500°C
In stock
Telwin
Reference: 802582-804109
(51 reviews)
207.15 kr
165,72 kr tax excl.
or 3 x 69,05 kr
Free delivery
2-year warranty
Special pliers for MIG/MAG torch
Used for:
cleaning the inside of the nozzle
Cutting excess wire at the torch outlet before welding
Replacing the contact tip or torch nozzle
In stock
StrongHandTools
Reference: MSA
(12 reviews)
946.16 kr
756,93 kr tax excl.
or 4 x 236,54 kr
Free delivery
2-year warranty
Quick and easy for holding parts
Ideal for holding round and square tubes as well as sheet metal plates
2 sizes are available and 3 models:
MSA46-HD: pulling force 40 kg - Dimensions 111 x 95 x 29 mm - Angles 45 and 90°
MSA48-HD: pulling force 75 kg - Dimensions 152 x 130 x 35 mm - Angles 45 and 90°
MSA53-HD: pulling force 65 kg - Dimensions 152 x 130 x 35 mm - Angles 45 - 60 and 90°
In stock
FISCHER-DAREX
Reference: 4176
(1 review)
114.79 kr
91,83 kr tax excl.
Fast delivery
2-year warranty
Spring compass with polished steel tips
Length 150 mm
Screw adjustment
FISCHER-DAREX
Reference: Ecrous
43.89 kr
35,12 kr tax excl.
Fast delivery
2-year warranty
Pack of 40 rivet nuts.
Used as a threaded insert to fix metal to metal: stool tubes, chairs, table legs, balustrades...
For use with the Fischer-Darex pliers reference 792942.
3 thread sizes available
In stock
RHODIUS
Reference: FS1
(5 reviews)
55.94 kr
44,75 kr tax excl.
Fast delivery
2-year warranty
Deburring grinding wheel thickness 4 mm
Bore 22.23
Diameter 125 mm
Suitable for stainless steel, steel and also cast iron
Its high level of fineness is ideal for weld seams. The machined part can be directly galvanized or painted
Available in grits 40 - 60 and 80. No additional fine deburring is required
Used for treating weld seams, grinding angles and edges, surface finishing, leveling, deburring
In stock
StrongHandTools
Reference: T65056
229.03 kr
183,22 kr tax excl.
or 3 x 76,34 kr
Free delivery
2-year warranty
Clamping bolt for welding table with 16 mm diameter hole
Adjustment range: 22 mm ~ 27 mm
In stock
RHODIUS
Reference: 210829
(6 reviews)
40.99 kr
32,79 kr tax excl.
Fast delivery
2-year warranty
Extra thin cut-off disc for optimal precision. This disc has a thickness of 0.6 mm
Producing very little burr, it allows cutting of steel and stainless steel
Very useful for thin sheet materials such as automotive bodywork, thin-walled tubes and profiles, corrugated sheets...
Bore 22.23 diameter 125 mm
In stock
StrongHandTools
Reference: UDN
(4 reviews)
228.47 kr
182,78 kr tax excl.
or 3 x 76,16 kr
Free delivery
2-year warranty
Clamping clamp for table top with Ø 16 mm fixing hole
2 clamp sizes:
UDN6150: 150 x 83 mm
UEN6200: 200 x 100 mm
In stock
Weldline
Reference: PICKINOX-P
(4 reviews)
271.12 kr
216,90 kr tax excl.
or 3 x 90,37 kr
Free delivery
2-year warranty
Removes oxides after stainless steel welding.
Available in 2 kg and 10 kg jars in paste form
Pickling is the operation that removes all oxides after welding, by eliminating the surface layer depleted as a result of heat treatment.
It is the most important step in the treatment process.
It should be noted that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not only mean cleaning the weld beads but primarily consists of restoring the characteristics of stainless steel.
How to use Picklinox paste?
Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable period depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.
Tri-material handle
Aluminum frame
2-position cutting adjustment: 90° / 45°
Quick blade change via knob in the handle
Supplied with one bi-metal blade *** and a blade holder handle