Italy
Germany
Netherlands
Croatia
Denmark
Finland
Greece
Ireland
Portugal
Norway
Bulgaria
Estonia
Latvia
Lithuania
Poland
Czech Republic
Romania
Slovakia
Slovenia
Hungary
Spain
- Out of stock
Pack of 4 center punches Ø 2.5-4-6-8 mm
Knurled body with zinc-plated finish
Reference: PXJ4
Set of 4 center punches
91.80 kr
73,44 kr tax excl.
Out of stock
Pack of 4 center punches Ø 2.5-4-6-8 mm
Knurled body with zinc-plated finish
Customer reviews
Product reviews
-
not yet tried unlike the soldering equipment but seems ok
-
Very good
-
Very good
Expert advice for professionals and individuals
Benefit from the support of specialists, whatever your profile.
Secure payment
Your transactions are protected by the latest security technologies.
Express delivery in 24/48 h
Fast dispatch to France, Europe and overseas territories upon confirmation of your order.
Best price guaranteed
Enjoy the most competitive prices on the market all year round.
16 other products in the same category:
In stock
SILICONI
Reference: ALUSIL
(1 review)
91.80 kr
73,44 kr tax excl.
Fast delivery
2-year warranty
ALUSIL is a spray product containing a high level of aluminum. It is suitable for welding touch-ups and for protecting aluminum parts from oxidation.
It forms a film that restores and protects aluminum surfaces.
It can be painted over or left without a final protective coating.
400 ml aerosol
INSTRUCTIONS FOR USE
Clean and degrease the parts to be treated. Shake the aerosol vigorously until the ball moves, and during application, continue to shake the product occasionally to keep it homogeneous. Spray from a distance of 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent valve blockage.
CHARACTERISTICS
Base: Pure aluminum paint
Propellant: Odorless denatured hydrocarbon
Coverage power: High
Dry film thickness: 15/20 microns
Drying: Fast
Temperature resistance: High
Color: Metallic
Specific gravity: 0.9 kg/lt
Dry residue: Approximately 30'
In stock
StrongHandTools
Reference: T64216
(1 review)
98.04 kr
78,43 kr tax excl.
Fast delivery
2-year warranty
This stop allows workpieces to be held in place
Compatible with any welding table with Ø 16 mm holes
Tube size: 65 mm maximum
In stock
Weldline
Reference: PICKINOX-P
(4 reviews)
271.12 kr
216,90 kr tax excl.
or 3 x 90,37 kr
Free delivery
2-year warranty
Removes oxides after stainless steel welding.
Available in 2 kg and 10 kg jars in paste form
Pickling is the operation that removes all oxides after welding, by eliminating the surface layer depleted as a result of heat treatment.
It is the most important step in the treatment process.
It should be noted that a weld bead is a surface that has been heated and generally loses its stainless properties.
For these reasons, the pickling operation does not only mean cleaning the weld beads but primarily consists of restoring the characteristics of stainless steel.
How to use Picklinox paste?
Degrease the surface to be treated with the specific product CLEANOX.
Then apply a layer of paste.
Rinse with water after a variable period depending on the grade of stainless steel and the type of welding (up to 30 minutes).
Do not expose the product or the treated surface to sunlight or any atmospheric agent.
In stock
FISCHER-DAREX
Reference: 804303
(7 reviews)
55.39 kr
44,31 kr tax excl.
Fast delivery
2-year warranty
Chrome vanadium locking pliers 250 mm bi-material handle
Opening system up to 53 mm and 35 mm depth.
Serrated jaws for secure holding
Ergonomic locking system, clamping force adjustment via knob
Save 10%
In stock
Trafimet
Reference: lot 010341
(32 reviews)
128.86 kr
143.18 kr
103,09 kr tax excl.
Free delivery
2-year warranty
Chipping hammer for removing welding slag when using coated electrodes (rutile, basic...) or gasless welding wire.
Weight 273 grams
Steel handle with a total length of 24 cm.
Handle length 11 cm (included in the total dimension of 24 cm).
Wire brush with wooden handle for brushing the weld to achieve a clean bead.
Total brush length including handle 29 cm
Handle length 13.5 cm
In stock
FISCHER-DAREX
Reference: CGJ5
(1 review)
76.71 kr
61,37 kr tax excl.
Fast delivery
2-year warranty
Knurled body pin punch Ø 0.8 mm.
Diameter 2-3-4-5 and 6 mm
In stock
FISCHER-DAREX
Reference: DB9
(2 reviews)
230.27 kr
184,22 kr tax excl.
or 3 x 76,76 kr
Free delivery
2-year warranty
Side opening.
Hardened steel, zinc-plated finish, sharpened tools
Diameter 2-3-4-5-6-7-8-9-10 mm.
In stock
SILICONI
Reference: ZINCOSIL 430
77.96 kr
62,37 kr tax excl.
Fast delivery
2-year warranty
ZINCONSIL 430 is used for cold galvanising on all metals. An aerosol with a high zinc content used particularly for touch-ups on welds, to restore or galvanise metal parts, to galvanise and protect bolts exposed to weathering for long periods, to restore grilles, gates, metal parts, containers and metal structures.
ZINCOSIL 430 is also an effective protector against corrosion from atmospheric agents, salt and moisture.
400 ml aerosol
PROPERTIES:
- Contains no chlorinated solvents,
- High zinc content,
- Fast drying,
- Does not drip,
- High coverage power,
- High corrosion resistance,
- Good resistance to atmospheric agents, washing agents, oxidising agents.
- Colour identical to galvanising,
- Durable protection
- The aerosol is fitted with an anti-drip diffuser; its use does not cause stains.
INSTRUCTIONS FOR USE
Shake before use for one minute until the ball inside moves freely.
Even during application, shake the product regularly to keep it homogeneous. Clean and degrease the surfaces to be treated. Spray from a distance of approximately 25 cm.
After use, invert the aerosol and spray the product for a few seconds to prevent the valve from becoming blocked.
SPECIFICATIONS
Base: Pure zinc 98% on synthetic backing
Pigment purity:>98%
Propellant: Denatured and odourless hydrocarbon
Appearance: Light grey colour
Dry film thickness: 20 to 40 µm (cross-coat)
Coverage capacity: high
Coverage rate: approx. 120 ml/m²
Temperature resistance: -50°C to +250°C (Metal powder resists up to 700°C)
Drying time: 5 to 10 minutes. Fast drying, does not drip.
Electrical conductivity: high
Abrasion resistance: Very high
Cross-cut: DIN 53151 - ISO 2409 = GTO/GT1
Oxidation resistance: Very good corrosion resistance
In stock
StrongHandTools
Reference: UBN110
(5 reviews)
225.01 kr
180,01 kr tax excl.
or 3 x 75,00 kr
Free delivery
2-year warranty
Accessory designed for tables 4mm thick
In stock
StrongHandTools
Reference: T64203
(1 review)
62.31 kr
49,85 kr tax excl.
Fast delivery
2-year warranty
This stop allows workpieces to be held in place for welding. Compatible with any welding table with Ø 16 mm holes
Dimensions:
Diameter 25 mm
Useful stop height: 37 mm
Total height: 52 mm
In stock
A.T.I
Reference: 16508
149.96 kr
119,97 kr tax excl.
Free delivery
2-year warranty
Welding brush with plastic handle featuring crimped steel wire for brushing the weld bead to remove slag.
Long handle to keep a safe distance from the heat of the welded part
Total brush length including handle: 370 mm
Effective length: 135 mm
In stock
Empire
Reference: 5132002901
(3 reviews)
345.62 kr
276,49 kr tax excl.
or 4 x 86,41 kr
Free delivery
2-year warranty
TRUE BLUE sliding bevel, anti-corrosion aluminium. Very precise marking. High contrast for better measurement readability. Very sturdy aluminium handle Length 254 mm
In stock
FISCHER-DAREX
Reference: 804300
(7 reviews)
111.88 kr
89,51 kr tax excl.
Fast delivery
2-year warranty
Locking pliers length 230 mm.
Serrated jaws for a firm grip
4-position rack for adjusting clamping up to 60 mm and 30 mm depth.
Adjustable clamping force via knob.
In stock
FISCHER-DAREX
Reference: CPJ5
(1 review)
88.90 kr
71,12 kr tax excl.
Fast delivery
2-year warranty
Knurled body Ø 0.8 mm
Diameter 2-3-4-5-6 mm
In stock
SILICONI
Reference: SBLOCCANTE
68.68 kr
54,94 kr tax excl.
Fast delivery
2-year warranty
PK is the ultimate versatile unlocking lubricant spray that Siliconi Spa takes pride in as part of its extensive range of high-quality technical aerosols for industry.
The PK multipurpose spray is ideal for releasing, lubricating, cleaning and de-oxidising bolts, gears, work tools, delicate mechanisms, electrical components, seals and industrial machinery from dirt, rust and oxidation.
PK performs seven simultaneous actions:
- Action of unlocking nuts, screws, bolts, and components seized by rust;
- Lubricating action for moving mechanisms, electronic parts, automotive components, bicycles, work and household tools;
- Anti-rust protective action on metal surfaces, through the creation of a thin film that protects the treated surface from corrosion caused by atmospheric agents and salt for a long time;
- De-oxidising action on electrical contacts: reactivates oxidised contacts and eliminates electrical dispersion;
- Water-repellent action: removes water and moisture from every treated surface;
- Anti-freeze action: allows resistance to sub-zero temperatures;
- Cleaning and degreasing action: removes grease, oil and deposits from metal surfaces.
Among its many properties, the PK multipurpose spray is particularly suited to surfaces in marine environments, does not attack rubber or plastic, and contains no silicone.
The product is available in both the standard version and with the SMART dispenser button, which allows targeted dispensing, thanks to the practical tube mounted on the dispenser button, which increases spray precision on the least accessible parts and enhances the product's action. The great ease of application of the PK spray is characterised by the ability to dispense the product in any position in which the aerosol can is placed.
The PK multipurpose spray is a green product, as it contains renewable raw materials and the production process used to create it uses 80% renewable energy.
In stock
SILICONI
Reference: METALCLEAN 300
(1 review)
68.68 kr
54,94 kr tax excl.
Fast delivery
2-year warranty
METACLEAN is a degreaser and aerosol cleaner for metals.
It removes all types of dirt present on metal: oil traces, grease, incrustations, tar, carbon and adhesive residues. It is also effective on steel and aluminum.
400 ml aerosol can
INSTRUCTIONS FOR USE
(Concentrated product – shake well before use)
Spray onto surfaces to be treated, then clean with a cloth or with compressed air.
CHARACTERISTICS
Base: Mixture of solvents and degreasers with low surface tension
Appearance: Clear liquid
Propellant: Denatured hydrocarbon, non-toxic, odorless, colorless.
DOES NOT CONTAIN CFC
Pack of 4 center punches Ø 2.5-4-6-8 mm
Knurled body with zinc-plated finish